Billy Goat SC121H Manuel d'utilisateur télécharger pdf (Page 12)

370406 F103104A

8. SAFETY INFORMATION

Before using the turf cutter it is essential that the operator has understood the warnings,

do’s and don’ts and precautionary measures given in this manual and in the engine manual:

the prevention of injury to the operator, third parties, animals or objects directly depends

on observance of these instructions.

A) GENERAL INSTRUCTIONS

 Use of the turf cutter for purposes other than those envisaged is strictly prohibited.

 Climbing aboard and/or riding on the turf cutter is strictly prohibited.

 Tampering with the safety systems and guards is strictly prohibited.

 Modifications to devices/components not envisaged by the manufacturer are strictly

prohibited.

 The electrical parts of the engine must be protected at all times.

B) TRAINING

 Read the Operator’s Manual and the Engine Manual before using the machine.

 Use of the machine by minors under the age of 16 years or by persons without the

necessary psychological and physical capabilities is forbidden.

 Do not use the machine near other persons or within enclosed areas.

 The placing of hands, other parts of the body and clothing in the moving parts of the

machine is prohibited.

 It is forbidden to approach the moving parts.

 Before carrying out any inspection or servicing operations make sure that the engine

has been switched off and the spark plug wire removed.

C) PREPARATION

 Make sure that the working area around the machine is free of obstacles and has

sufficient lighting.

 Before switching on the engine make sure there are no persons, animals or vehicles in

the vicinity .

 Before switching on the engine make sure that both engagement levers (forward clutch

control lever - Fig. 1, ref. C and blade clutch control lever - Fig. 1, ref. A) are in the

disengaged position (released) ; then place the gear lever in neutral (Fig. 2, ref. C )

 Before switching on the machine make sure that the screws, fixing elements and

protection devices are in place and that the affixed notices are legible.

 Then: Make sure that the wheel fixing bolts have been tightened fully.

 Secure all blade nuts and fixing bolts to prevent their loss during work operations.

Replace any old or worn blades.

 The cover ( Fig. 1, ref. F) should not be moved for any reason whatsoever while the

machine is in use.

 When switching on the engine check the position of the various control levers (see the

section on “Controls and adjustments”).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 40 41

Pas de commentaire

Billy Goat SC121H Manuel d'utilisateur Page 12