Billy Goat SC121H Manuel d'utilisateur télécharger pdf (Page 7)

370406 F103104A

3. TECHNICAL DATA FOR THE SOD CUTTER SC121H

ENGINE : Gasoline, HONDA GX 160 K1

ENGINE CAPACITY : 5.5 Hp (4.0 kW)

CUTTING WIDTH : 12” (30 cm)

CUTTING HEIGHT : adjustable up to 35 mm

SPEED GEARS : 2 forward gears

TRANSMISSION : mechanical

GEARS : in oil bath

START : recoil

HANDLEBARS : height-adjustable

TYRES : front tyres GARDEN 3.00-4

rear tyres TRACTOR 3.00-4

DIMENSIONS L x W x H (mm) : 780 x 420 x 610 mm

WEIGHT (kg) : 73

ACOUSTIC PRESSURE, measured according to EN 12733: 86,2 dBA

ACOUSTIC POWER, measured according to EN 12733: LWA 97 dBA

VIBRATION LEVEL TRANSMITTED TO THE HANDLEBAR ( EN 12 733) AW: 1,8 m/s²

Environmental conditions

Unless otherwise stated at the time of ordering it is understood that the machine is to work

normally in the environmental conditions covered by the following points.

Environmental conditions other than those described may cause mechanical breakage

resulting in the creation of dangerous situations for persons.

ALTITUDE

The altitude of the place in which the machine is to be used must not exceed 1500 m

above sea level.

TEMPERATURE

Minimum ambient temperature: -5°C

Maximum ambient temperature: +50°C

ATMOSPHERIC CONDITIONS

The electrical equipment will function correctly in atmospheric conditions with a relative

humidity up to 50% at a temperature of 40°C and at 90% with a temperature up to 20°C

(without condensate).

ATMOSPHERE WITH RISK OF EXPLOSION AND/OR FIRE

The standard machine herein described is not designed to work in explosive atmospheres

or in those with risk of fire.

1 2 3 4 5 6 7 8 9 10 11 12 ... 40 41

Pas de commentaire

Billy Goat SC121H Manuel d'utilisateur Page 7